Receive error
'Storage Info' warning] unable to name LUN mpx.vmhba0:C0:T0:L0. Cannot set display name on the device,...
I can see the two VMFS when I go to the VSphere Home / inventory / inventory >> Configuration (tab) >>> Hardware>>>>Storage >>> Datastore >> add then to the 3rd screen.
The result of following KB 1002281
esxcfg-scsidevs -c
Device UID Device Type Console Device Size Multipath PluginDisplay Name
mpx.vmhba0:C0:T0:L0 CD-ROM /vmfs/devices/cdrom/mpx.vmhba0:C0:T0:L0 0MB NMP Local PLDS CD-ROM (mpx.vmhba0:C0:T0:L0)
naa.6001a620000142313132324230303230 Direct-Access /vmfs/devices/disks/naa.6001a620000142313132324230303230 2097151MB NMP Drobo iSCSI Disk (naa.6001a620000142313132324230303230)
naa.6d4ae5207043c3002254dc151a9ff383 Direct-Access /vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383 1906688MB NMP Local DELL Disk (naa.6d4ae5207043c3002254dc151a9ff383)
naa.6d4ae5207043c3002254dc151aa07441 Direct-Access /vmfs/devices/disks/naa.6d4ae5207043c3002254dc151aa07441 1906688MB NMP Local DELL Disk (naa.6d4ae5207043c3002254dc151aa07441)
t10.DP______BACKPLANE000000 Enclosure Svc Dev/vmfs/devices/genscsi/t10.DP______BACKPLANE000000 0MB NMP Local DP Enclosure Svc Dev (t10.DP______BACKPLANE000000)
& fdisk -l /vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383
Disk /vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383: 1999.3 GB, 1999307276288 bytes
64 heads, 32 sectors/track, 1906688 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383p1 5 900 917504 5 Extended
/vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383p2 901 4995 4193280 6 FAT16
/vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383p3 4996 1906688 1947333632 fb VMFS
/vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383p4 * 1 4 4080 4 FAT16 <32M
/vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383p5 5 254 255984 6 FAT16
/vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383p6 255 504 255984 6 FAT16
/vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383p7 505 614 112624 fc VMKcore
/vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383p8 615 900 292848 6 FAT16
Partition table entries are not in disk order
& fdisk -l /vmfs/devices/disks/naa.6d4ae5207043c3002254dc151aa07441
Disk /vmfs/devices/disks/naa.6d4ae5207043c3002254dc151aa07441: 1999.3 GB, 1999307276288 bytes
255 heads, 63 sectors/track, 243068 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/vmfs/devices/disks/naa.6d4ae5207043c3002254dc151aa07441p1 1 243068 1952443646 fb VMFS
& fdisk -u /vmfs/devices/disks/naa.6d4ae5207043c3002254dc151a9ff383
The number of cylinders for this disk is set to 1906688.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help):n
No free sectors available
& fdisk -u /vmfs/devices/disks/naa.6d4ae5207043c3002254dc151aa07441
The number of cylinders for this disk is set to 243068.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
Partition 1 is already defined, delete it before re-adding
q
^^^^^^^^^^^^^^^^^^^^^^^^^^^end of KB 1002281
KB 1011387 I don't think applies because LUN not reported as snapshot!
"detected to be a snapshot" returns 0 Entries
Search complete, found 'SCSI IO to non-existent partition' 0 time(s). (0 file(s)).